Re: Wiring 12v coil IH 263 6cyl,Switch w/push butt

Posted by JOSSETTE on February 04, 2005 at 20:17:55 from (216.114.223.210):

In Reply to: Wiring 12v coil IH 263 6cyl,Switch w/push button posted by Tom in Pa. on February 04, 2005 at 17:29:33:

got a head of my self

you do need a wire from the resis- Alt post back to the switch B side. i do this every day you would think typing it be would the same as doing it. not really.

what i do is run 10 gauge through out the system.
solid wire works the best but the extension cords work too. you can run the cord from front to back and it has a protective sheath.

black wire from key to resis
white from pos Amp to bolt on Alt
green from relay to pos on coil
red for the hot start connections.

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]