Re: H Motor Rebuild Question

Posted by Theman on February 03, 2005 at 11:36:03 from (65.248.77.5):

In Reply to: H Motor Rebuild Question posted by MAGMAN on February 02, 2005 at 17:22:56:

The tube indeed is the oil return pipe. It is threaded for 1/8" pipe. Get a 6" black nipple (NOT galvanized) at your favorite plumbing supply and cut to length. By length, make sure it extends past the bottom of the block but doesn't interfere with the shallow part of the pan. The only reason I can think of for it being there is so that oil can return to the sump a little more directly.

When you get your block back make sure all oil passages are clear and clean. This includes the one drilled up the front main bearing cap bolt hole, main gallery, and rocker supply. I was surprised to see what came out of the block of my H after being dipped.

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]