Re: H Motor Rebuild Question

Posted by Dale L on February 02, 2005 at 19:13:48 from (69.128.228.88):

In Reply to: H Motor Rebuild Question posted by MAGMAN on February 02, 2005 at 17:22:56:

Magman I just finished rebuilding an H this year.I'm not sure what the tube is for but if I remember correctly it just screws into the bottom of the block. The one thing I ran into when I rebuilt the engine was, I took the studs out of the block to plane the deck of the block and I did not notice that five of the studs where longer than the rest. Make sure they go back in the correct spot.Two where on the leftside near the back for the [throttle bracket] and three where in the center of the block because there where washers underneath the nuts. It's a fun project allyou need is patience. Dale

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]