Re: moved post

Posted by CNKS on January 31, 2005 at 18:20:42 from (204.249.178.138):

In Reply to: Re: moved post posted by brtx on January 31, 2005 at 17:32:30:

The minimum I'm going to do is get new shafts, and have someone accurately measure and check both the bushings and the support holes for roundness. If the bushings cannot be replaced
(still not sure), and the old ones have to be machined, the available OEM shafts won't fit and will have to be made, and the oil holes drilled. I haven't mentioned the ball that contacts the push rod, those are replacable, and available for about $10 each. If all of that is machined or replaced, along with having new shafts made, I'm probably approaching the price of all new rockers and shafts. It's just that paying as much for rocker arms as I am paying for the whole overhaul kit, sort of makes me want to barf.

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]