300 utility ipto

Posted by randy on January 30, 2005 at 15:52:06 from (198.77.48.158):

posted a question a couple times about not being able to stop the pto from turning.I removed the whole pto assy. from the tractor and disassembled found the bands inside to be in good condition but after reassembly and ajustmet I still could not get the darn thing to stop. after several calls to local and out of state dealers no one could give me an answer. so I remove the small cylinder on the side of the pto and took it apart cleaned and oiled then reassembled .. now the pto works properly...hope this litte info works for someone else with the same problem .. Randy

Follow Ups:

• Re: 300 utility ipto Ida Red 20:37:33 01/30/05 (0)
• Re: 300 utility ipto Irv 16:54:10 01/30/05 (0)
• Re: 300 utility ipto B Watson 16:31:54 01/30/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]