Re: M Puller

Posted by ChadS on January 25, 2005 at 02:05:22 from (4.224.132.209):

In Reply to: M Puller posted by Will Sick on January 24, 2005 at 18:41:04:

Go with a set of Super M 4-1/8 pistons set which takes you out to 281 ci. with the right fuel, carb work 70-75 hp easily. the M, takes the large wrist pin, so the Super M piston set would be a good choice for the $$ Maybe throw in a 450 cam too, would help with torque in the lugging rpms. Good combo for not alot of $$. Most kits, have comformatic pistons, which are pretty good for making better compression VS the older piston sets . I do make pistons for these, that are higer compression yet,, but the LP head will put you at 200 psi, with the comformatic pistons. email is open if you need more info on carbs and such to use. Chads

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]