Seal Replacement on 400D

Posted by Farmall Frank on January 24, 2005 at 16:03:02 from (65.30.113.26):

You folks have been GREAT in advice on my questions. So far, I have replaced the TA, bunch of seals and bearings in the mid part of the tractor, main clutch, working on rear engine seal, and NOW want to replace some seals on the back part. Those are:

1. Brake pedal seal where it goes into the housing.

2. PTO brake band operating lever seal into the housing.

Do you have to drive these out from inside the housing or can all work be done from the outside? If from the outside, what is the best way to get them out?

Follow Ups:

• Re: Seal Replacement on 400D CNKS 17:45:41 01/24/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]