Re: Farmall 504 hydraulic information

Posted by Hugh MacKay on January 24, 2005 at 04:08:18 from (216.208.58.187):

In Reply to: Re: Farmall 504 hydraulic information posted by 4 States Salvage on January 23, 2005 at 17:31:16:

Dale: Drain it as best you can, change that filter on right side of torque tube. Fill with new Hy tran fluid. 06 and 56 series tractors had a dip stick in fill pipe right on platform ahead of seat. That 504 probably still uses fill to level plugs with a fill cover just opposite gear shift.

One thing I have found with Farmalls from that era, (1958 to 1968) hydraulics work much better and you will have far less long term trouble if you run that transmission about 3/4" above the full mark. Note I said transmission, don't try it with engine crankcase

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]