300 row crop questions

Posted by texp on January 23, 2005 at 18:34:57 from (64.61.215.113):

What are the initial carbureator settings for a 300 row crop gas? I couldn't get the 'ol gal to run for a long time. Turns out that the air cleaner oil bath was full of ice and slush. I have no idea how that could happen - the plastic/metal outside filter is in place. Anyway, I managed to get the carb off, and a new kit, but I need the initial settings.
Also, the former owner replaced all of the truss-head screws that hold the sheet metal on, with hex head bolts. Where can I get the truss-head bolts. I asked this about 6 months ago, someone replied, but I was not able to contact him??
One more thing. What kind of wrench do you use to get the carbureator mounting nut that is closest to the engine off/on? I ended up destroying a 9/16 combination wrench, and it still doesn't work well.
Tex

Follow Ups:

• Re: 300 row crop questions CNKS 19:33:41 01/23/05 (0)
• Re: 300 row crop questions TDK 18:53:59 01/23/05 (0)
• Re: 300 row crop questions PAULIH300 18:39:42 01/23/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]