Re: repower md with 400sb chevy help??

Posted by ChadS on January 22, 2005 at 16:00:55 from (4.224.132.74):

In Reply to: Re: repower md with 400sb chevy help?? posted by rancherruss1916 on January 22, 2005 at 15:03:57:

Click the link below. On the input shaft, use a piece of pipe, welded straight to connect the 2 shafts. Not hard to build a throwout bearing adapter to bolt in the M bellhousing to use on a chevy diaphram style clutch. Hope this helps a bit, ChadS

• http://www.ytmag.com/pulling/messages/53259.html

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]