Re: Who has rebuilt a touch control block on a sa?

Posted by JLE on January 11, 2005 at 04:50:06 from (209.247.222.107):

In Reply to: Who has rebuilt a touch control block on a sa? posted by scott#2 on January 10, 2005 at 20:28:10:

Its not that bad, just take your time and lay everything out as you tear it down. The hardest part I've had is cleaning the gasket off between the cover and the block. The control valves also have o-rings, so you might as well do it all at once. The repair kit at one time had a parts brake down included. Good luck!!!

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]