Re: Re: Re: 50T Baler with IH Motor

Posted by Old Hay Guy. on January 10, 2005 at 18:13:52 from (65.73.120.113):

In Reply to: Re: Re: 50T Baler with IH Motor posted by jim on July 18, 1999 at 10:44:12:

I have spent some time, years ago, loading bales behind a 50T baler. They could bale a lot of hay. Ours had a Cub engine. It would make a longer bale if a wad went through just as it was about to tie, due to being slower greared than a pto model. The square brass shear pins cost about $.50 back then. Pulling the flywheel to replace it was a job in itself. Ours took a spell of breaking pins rapidly. In time we used a 27 cent lockwasher to take up the slack that was the real trouble all along. I hope this throws some light on the matter.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]