Re: Clutch release bearing and pilot bearing

Posted by Roger WI on January 08, 2005 at 16:18:36 from (69.58.151.28):

In Reply to: Clutch release bearing and pilot bearing posted by Tailhunter on January 07, 2005 at 17:51:15:

Someone else on this forum gave me this idea and I have been using it ever since. I screw the right sized thread tap into the pilot bearing and as it bottoms out it pushes the bearing out. Also, people have used a shaft that fits the pilot bearing by filling the pilot bearing with grease and then pound on the shaft and it extracts the bearing (have to cover with a rag as some grease flies out). Roger

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]