Re: 484 for loader work

Posted by JB2 on January 07, 2005 at 19:47:20 from (66.185.85.75):

In Reply to: 484 for loader work posted by jmflem on January 07, 2005 at 19:26:04:

Hi jmflem, my brother has an IH 2250 quick attach loader on his 495 (same as 484) but this loader is to heavy for 495 front end when handling round bales. He has cracked the front axle box frame.

If you are going to be transporting large round bales, I would suggest 584 or 684 and if in soft ground a 4WD.

The 484 has good hydraulics for a loader but a smaller lighter loader like the IH 1550 series. Again requie weight on the rear end if you are transporting heavy loads.

My 2 cents
JB2

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]