Re: 560 gas exhaust manifold

Posted by Migraine on January 07, 2005 at 06:59:12 from (24.18.75.6):

In Reply to: 560 gas exhaust manifold posted by joe bauer on January 07, 2005 at 01:58:14:

We have replaced three manifolds on 560 gas models and have used after market replacements on 2. We cut and angled the upright pipe back about an inch and a half then back up and didn,t have to change or even enlarge the hole in the hood at all. Just drop a new 2 inch piece down the hole through the hood and see how much offset you need to use that existing hole., weld her up and away you go. These have been on for 4 and 5 years now with no problems. Migraine

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]