Re: Farmall Super C Hydraulics

Posted by Brian Schmidt on January 05, 2005 at 09:52:51 from (12.2.142.7):

In Reply to: Farmall Super C Hydraulics posted by Sol King on January 05, 2005 at 08:23:44:

While you are changing the hyd oil, go ahead and pull the hyd screen and clean it. It is the four bolt cover on the left side of the touch control block. It should have a temp gauge going to it or it is plugged off. You might find that it is collapsed or full of junk. It won't fix your drifting, but it may increase your cycle times. Replace the oil with Hy-Tran and no other brand of hyd oil.

I have found that these were rarely cleaned or that there is just that much junk in the system. Out of the six that I own, I have had to replace four of the screens at about $50 from IH. The good news is if you keep them clean, you should never have to buy a new one.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]