Re: pto dual speed from 1086 to 1586

Posted by trulyred on January 02, 2005 at 14:06:19 from (67.250.212.61):

In Reply to: pto dual speed from 1086 to 1586 posted by ben brown on January 02, 2005 at 09:58:30:

I just installed a dual speed into a 1566, should be the same situation except for the control linkage. You must swap the nose (input shaft & pump held on by 4 bolts 3/8). On the 1566 I used a cab type control linkage from a 1066. The 86 series is different and I'm not shure what has to be done, you may have to change out the linkage from any 86 series smaller tractors.

Follow Ups:

• Re: pto dual speed from 1086 to 1586 K.B.-826 14:21:28 01/02/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]