M drive shaft coupling question

Posted by Stroked550 on December 28, 2004 at 21:03:37 from (209.221.24.123):

Just replaced the clutch in a "51 Farmall M, the wavy looking plate that connects the trans yoke to the clutch shaft was worn almost through. Picked up 4 of the tapered bolts from the IH dealer and a new coupling plate from a salvage yard (dealer wanted $80 for it). Now that its all back together I noticed the replacement plate is thinner than the orig.- it has about 3/16" of play. Should I try and find a thicker plate or is it good as is?

Thanks
Ben

Follow Ups:

• Re: M drive shaft coupling question captaink 07:24:20 12/29/04 (0)
• Re: M drive shaft coupling question Merle Hoppenworth 05:34:17 12/29/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]