Re: Buddy seat on a Farmall B

Posted by gene b on December 26, 2004 at 15:05:39 from (66.43.221.243):

In Reply to: Buddy seat on a Farmall B posted by Wayne R. in Iowa on December 26, 2004 at 07:24:11:

Better start from scratch on the platform on left side as the bolt holes in the axle extension are not there so you cannot use an original without cutting off the rear so the bolt holes will line up in the fender and the trans case. You can make a u-shaped piece for the clutch to have a twin on the left side. If the brakes are locked together you can make some linkage to hook up on the left brake at the transmission so you would also have brakes. How far form IA CITY do you live? I could make the linkage and platform for you. e-mail [email protected]

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]