Re: My M has a miss

Posted by MagMan on December 21, 2004 at 14:12:25 from (205.188.117.13):

In Reply to: My M has a miss posted by Bubba on December 21, 2004 at 11:58:58:

I was just thinking we dont know what kind of work was done to your motor but check what every one else is saying along with valve lash adjustment if nothing works I think I would try The deal wher you pump the cylinder up for like when you are putting valve seals in a car motor. There is a fitting that screws in where the plug goes and with both valves closed you could put air to the cyl and take the spring and keeper off with out the valve dropping. Any ways I would see if she will hold pressure. Last resort maybe.
JON

Follow Ups:

• Re: My M has a miss El Toro 19:22:07 12/21/04 (0)
• Re: My M has a miss lee 14:38:56 12/21/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]