Re: LP to gasoline

Posted by John A. on December 19, 2004 at 20:29:17 from (65.161.170.30):

In Reply to: LP to gasoline posted by Marv on December 19, 2004 at 18:51:17:

Marv, Before you do any thing rash Take a few pics of it. Both sides. and of the fill valves so we who are up on the LPs can give you correct info on wheather it is factory or not.
The Stage II SMs were the first IH tractors that were factory LP equiped. Like DWV said the tank on the Stage IIs were short crosswise tanks with the valves faceing rear.(to the seat)
Stage III SMTAs (only 500 made) were longwise tanks the the valave assembly being a mono-valve unit @ the 11:00 o,clock position , at the rear of the tank while sitting on the seat.
Hope this helps.
Later,
John A.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]