Re: Diagnosting my electronics finally.

Posted by Allan in NE on December 19, 2004 at 06:28:09 from (148.63.132.164):

In Reply to: Diagnosting my electronics finally. posted by tanner clark on December 18, 2004 at 16:49:19:

Tanner,

You are almost there. Electrically you are fine.

Now, adjust the points for .020" when one of the cam lobes is under the rub block. This should make the points break to the .020" gap every time a new lobe comes around.

If it doesn't, the distributor must have bad bushings and this is allowing the shaft to "wobble" and the points are not breaking consistently with each lobe.

Hope ya get 'er,

Allan

Follow Ups:

• Re: Diagnosting my electronics finally. tanner clark 17:30:57 12/19/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]