Re: Soaking a carb?

Posted by lee on December 16, 2004 at 10:54:03 from (24.24.95.246):

In Reply to: Re: Soaking a carb? posted by old on December 16, 2004 at 09:21:39:

I agree with old on Berrymans. It's pretty good stuff (better than bio-degradables or water based types) but prolly not as aggressive as Allen's recommendation. Stuff the inlet/outlet with rags and clean the outside of the carby good with degreaser, gasoline, diesel, whatever. This will help keep your soaker can clean. Disassemble entire carby. An overnite soak of all parts (no plastic) in the Berrymans and a wash/rinse with industrial soap and hot water, compressed air blow-out. Do it again if necessary. Don't get water in the berrymans. Should do it. I don't like wire reaming the drillings exceptr as a last resort.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]