Re: Can you fit cast rims from a W30 on a 10-20

Posted by Mike Androvich on December 09, 2004 at 15:20:08 from (24.50.141.220):

In Reply to: Re: Can you fit cast rims from a W30 on a 10-20 posted by RS on December 09, 2004 at 05:57:33:

The rears are only different in the way the axle seals on the wheel. The axle size is the same. A W-30 has an extra stamped metal seal plate riveted to the inside hub that mates to a spring-loaded circular leather seal on the end of the axle. If you put a 10-20 wheel on a W-30 it will fit but will probably run grease out unless you have the rear end almost dry. The front wheels are also not the same but they seem to be able to interchange. I have a W-30 axle with 10-20 cutoffs on it and they fit fine. The dust seal doesn't work but they fit.

Follow Ups:

• Re: Can you fit cast rims from a W30 on a 10-20 RS 16:17:29 12/09/04 (0)
• Re: Can you fit cast rims from a W30 on a 10-20 F-Dean 15:38:18 12/09/04 (2)
  • Re: Can you fit cast rims from a W30 on a 10-20 Mike Androvich 16:54:38 12/10/04 (1)
    • Re: Can you fit cast rims from a W30 on a 10-20 RS 17:15:55 12/12/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]