Re: A For Snow Removal.

Posted by scotty on December 02, 2004 at 11:05:55 from (199.231.49.128):

In Reply to: A For Snow Removal. posted by farmallkid From ONT. on December 02, 2004 at 10:33:46:

Farmall Man,
Here is a pic of the side of my A, you can see the frame I fabricated below the tractor. I also made another frame that goes between the rear housings and that inturn pins onto the long frame under the tractor. The front of frame bolts up to the steering box, I made a solid square bar to go through the cultivator mount on the steering box and used 1/2" bolts to fasten it. The plow pivot is directly below that. I used heavy wall 1 1/4" square heavy wall tubing. You will also see two pulleys that I fabricated, one on the frame and the other mounted on the side of the engine. The blade width is 68" I believe. Would be happy to help you if any questions.

scotty

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]