Farmall & IHC Tractors Discussion Board |
Re: Farmall M Overdrive
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Farmer Bob on November 20, 2004 at 21:09:33 from (64.113.13.42):
In Reply to: Farmall M Overdrive posted by Lanny in SW Iowa on November 20, 2004 at 20:48:12:

Lanny, that lever is part of the set up for the Hiesler Overdrive (9 Spd) not to be confused with the M&W 9 Spd transmission option. In the picture above of my M also with Hiesler OD, you can see what the rest of the linkage looked like. The Disc brakes you have are Lambert Disc brakes and you will find that the IH replacement discs will not fit on the splines. You will have to specify "For Lambert" if you need to replace the discs. Lambert was another after market company that provided these to IH dealers and possibly the factory however, I'm sure about the factory. You have to be careful about the Hiesler as it tends to overspeed the Liftall pump and will blow the seals out of the pump in a hurry. Dad always knew when my brother and I had been sneeking the use of the OD. Big old oil spot on the machine shed floor was a dead give-away!
Follow Ups:
Home
| Forums
Today's Featured Article -
History of the Nuffield Tractor - by Anthony West. The Nuffield tractor story started in early 1945. The British government still reeling from the effects of the war on the economy, approached the Nuffield organization to see if they would design and build an "ALL NEW" British built wheeled tractor, suitable for both British and world farming.
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|