Well...got that pulley tight, but still pushin coo

Posted by Brian in NY on November 19, 2004 at 13:34:17 from (24.97.78.198):

My buddy came by and welded another bolt onto the one on my fan pulley's set screw...we got er loose and then got good tension on the belt.
While he was doin that I flushed the radiator out real good and we put er all back together....she is still pumpin (cold) antifreeze out the overflow once it heats up. His thoughts are either that the water pump ain't suckin enough (impeller blades maybe worn)or a head gasket is pumpin too much air in to the system to let the coolant in. Heck I don't know....any thoughts? What should we tear apart first? Thanks in advance.

Follow Ups:

• Re: Well...got that pulley tight, but still pushin brtx 20:03:32 11/19/04 (2)
  • Re: Well...got that pulley tight, but still pushin Brian in NY 07:17:47 11/20/04 (1)
    • Re: Well...got that pulley tight, but still pushin Allan in NE 07:23:03 11/20/04 (0)
• Re: Well...got that pulley tight, but still pushin Al,Runner 19:52:04 11/19/04 (0)
• Re: Well...got that pulley tight, but still pushin old 16:36:15 11/19/04 (0)
• Re: Well...got that pulley tight, but still pushin Steve W(NY) 13:43:06 11/19/04 (1)
  • Re: Well...got that pulley tight, but still pushin sphargy42 20:17:26 11/19/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]