Re: Super A remote hydraulics?

Posted by Haas on November 13, 2004 at 16:30:25 from (12.65.72.75):

In Reply to: Re: Super A remote hydraulics? posted by SAm in NS on November 13, 2004 at 13:42:03:

Yes, like the one that was stated in those previous discussions. I think the same one for the C/SuperC would work on the Super A. If properly made (Some discussion previously that some are not correct) and properly installed and plumbed to a remote valve, your touch control should still work (when you are not operating the remote valve) and the remote cylinder should work. There was some discussion previously about needing to chain the rockshaft arms to get pressure to the remote. This will not be necessary if the block is properly installed. Not a good idea to chain the rockshafts, as it can make the system operate under pressure all the time which will result in overheating.

Follow Ups:

• Re: Super A remote hydraulics? CNKS 19:45:24 11/13/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]