Re: M and 3PT.

Posted by T.B.W. on November 11, 2004 at 16:28:14 from (65.177.97.188):

In Reply to: M and 3PT. posted by Carlton on November 11, 2004 at 10:07:32:

The 3 point will bolt on the draw bar bolts. Most of them will let you leave the draw bar on. If it has 2 cylinders, you can tee them together and hook it into one side of the lift all discharge. I like the right side, that way you won't get it hooked into the wrong one. The only problem with this is the 3 point will drift down, like the 8n. You could put chains on the lift arms to keep them from drifting down, or you can put a remote valve on and the new valve will hold it. You can get the valve from Northern tool for about 125. I just put live hyd. on my M to run a three point and a loader. With 2 remote valves and all the hoses and fitting it cost me about $1600. but it sure is sweet not to have to have the clutch out for the loader to work and to get rid of the trip bucket.

Follow Ups:

• Re: M and 3PT. Dale in Denver 20:33:18 11/12/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]