Re: Farmall 100 Engine Rebuild Questions

Posted by Stan(VA). on November 10, 2004 at 21:15:20 from (208.59.156.169):

In Reply to: Farmall 100 Engine Rebuild Questions posted by Hobo,NC on November 09, 2004 at 18:14:37:

Hobo,
Cranks, Yes and No. They will interchange but as you noted, the pulleys are different. The 100 has the press fit, wide belt style, the 140 has a bolt on, narrow belt style, that corresponds to a redesigned water pump setup (the block casting was changed up front). I don't think they (the pulleys) can interchange and still get the pump working.

The rods should interchange.

The sleeves and pistons will not interchange from the 140 to the 100 block, different diameter at the O-ring. This has been covered many times, check the archives.

100 and 140 head/manifolds should interchange, but are different (valves, ports, runners). 140 should flow better, but you will need the 140 air cleaner if the newer manifold is used or the bolts won't line up.
Stan(VA).

Follow Ups:

• Re: Farmall 100 Engine Rebuild Questions Hobo,NC 04:59:09 11/11/04 (1)
  • Re: Farmall 100 Engine Rebuild Questions Stan(VA). 05:21:40 11/11/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]