Re: gen-reg connections?

Posted by Jim Becker on November 10, 2004 at 19:52:20 from (4.29.47.118):

In Reply to: gen-reg connections? posted by pete ellis on November 10, 2004 at 18:15:23:

I guess that depends on what you expect. If it has a cut-out rather than a voltage regulator, I would expect about 1 to 2 amps wired that way. If you run a wire directly from the generator F to ground you should get about 10 or 11 amps. Wiring the generator F to a properly functioning and grounded 4 position light switch will allow you to select between those two charging rates.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]