Re: Purchasing H Battery Box

Posted by Bob M on November 10, 2004 at 06:55:51 from (165.170.128.65):

In Reply to: Re: Purchasing H Battery Box posted by Steve W (NY) on November 10, 2004 at 06:06:33:

Steve - I had a similar experience (probably from place you got yours...) with a box I got for my Super M. The box was out of square by 1/4" or so - had to perform some body work to get the cover to fit. But more frustrating was the tapped bosses for the 1/2-13 cap screws that hold the cover/seat base on. These were tapped to some mystery screw thread - nothing SAE nor metric would screw into them. I finally cut them off and welded 1/2" nuts in their place.

OTOH the battery box I got at the same place for my Stage I Super H fit and worked fine. Only shortcoming is it did not include the rubber grommets/bumpers. But it was a simple matter to cob some up from materials I had around.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]