Re: 1086 operators platform

Posted by the tractor vet on November 06, 2004 at 19:04:09 from (4.124.87.78):

In Reply to: 1086 operators platform posted by sscattle on November 05, 2004 at 11:11:27:

We took a cab off a 1086 that had been rolled and replaced it with one that we got from one of my contact and had it setting around when my buddy deceided that he wanted to make his 1066 into a 1086 for pullen and make it open station , So we fired up the tourches and made it and open station and made up mounting brackets and took muffler tubing to make the round pices that a 786 has on the left and right ft. edges that go from the floor plate to the hood line made up some sheet metal patches to cover the box tubing of the ROPS posts on the rear pulled the interior off and amde sheetmetal pannels for the sides where the foam was . So you can do it and make it look factor every body thought that he went and bought and 86 the next year out and it was still the old 1066 underneath.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]