Re: 1086 operators platform

Posted by K.B.-826 on November 05, 2004 at 20:09:20 from (209.163.30.65):

In Reply to: 1086 operators platform posted by sscattle on November 05, 2004 at 11:11:27:

All 886, 986, 1086, 1486, and 1586 tractors left the factory with a cab or a 4-post ROPS with canopy. Aftermarket cabs were never used on these tractors. The only true 86 series tractor to leave the factory with an actual open operators platform was the 786 (the 686 had an open station, but that is a 656 series tractor, not an 86 series) Your only real option is to find a 786 and swap the platform onto your 10, then put the cab on the 7. I think it would be very easy to swap them. Unfortunatly, they only built about 1800 786's. If you don't mind having the 4-post ROPS, there are quite a few 86's around with it.

Follow Ups:

• Re: 1086 operators platform Allan in NE 02:07:28 11/06/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]