Re: Countershaft nut update

Posted by David in UT on October 30, 2004 at 11:58:55 from (208.15.63.195):

In Reply to: Re: Countershaft nut update posted by Dick Davis on October 30, 2004 at 03:01:17:

DD,

It might have helped, although I started out just laying some beads on the nut to see if the heat alone would break it loose. Welding the stock onto it was my second try. If I had an oxyact torch, I think I could have gotten the nut a lot hotter (at least more evenly hot) than with the welder alone. Definitely a good thought though...if I could have used heat alone, I wouldn't have to grind my hacked-up wrench off the nut! ;-)

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]