Re: Dealer say oil pumps don't need rebuilt on H

Posted by Wayne Swenson on October 28, 2004 at 17:31:34 from (66.191.70.4):

In Reply to: Re: Dealer say oil pumps don't need rebuilt on H posted by John *.?-!.* cub owner on October 27, 2004 at 18:42:59:

I would disagree with John; Cam bearings are quite likely the most overlooked cause of low oil pressure when hot. It is easy to replace rod & main bearings; not so easy to replace the cam bearings so the home hobbiest may just "overlook" them in the assembly process.
In many engines the oil is first fed to the cam and then what is left over goes to the mains & finally the rods.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]