Re: Renew Super A steering gear box

Posted by Dave Sherburne, NY on October 23, 2004 at 17:47:44 from (216.238.207.111):

In Reply to: Renew Super A steering gear box posted by Charles Houston on October 22, 2004 at 17:35:02:

If you have an older A with the vertical shaft
that has a square end sticking out of the bottom
of the steering box, it is probrobly worn bad at
that spot . Also, the keyway on the shaft that
holds the sector gear is also worn. On one of
mine, I shimmed the square shaft with pieces of a
tin can. and fixed the keyway. On the other, I
replaced the square shaft with a shaft from a
newer model tractor, 100 or 140or something,don't
remember which, and replaced the steering arm
also. this method also requires machine work on
the sector gear keyway ie. cut new keyway 180
degrees fom the old one. Any questions, E-mail
me , my address isn't hid , I have a great junk
mail catcher.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]