2 Point Prolbem

Posted by Dann on October 19, 2004 at 19:56:38 from (69.21.20.69):

I bought a 460 Farmall with all the lift linkage missing that goes back to the lift clyinder Put it al on new When you work the lift lever the 2 point will go up but wont go down unless you shutt the motor off But if you take the linkage off the arm that comes out of the valve That goes back to clyinder it will go up and down and the arm will turn around but you dont have any down pressure and lift will not stay in one place and just keep going up and down If you switch hose around it will go up not down any ideas? Dose the valve have to be timed? Is the little arm that comes out of the valve suppose to go around and around or stop part way?

Follow Ups:

• Re: 2 Point Prolbem captaink 07:17:27 10/20/04 (0)
• Re: 2 Point Prolbem Joe Evans 07:17:25 10/20/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]