Thanks For The Help! ;-)

Posted by RI Red on October 05, 2004 at 19:00:17 from (24.250.44.10):

I'd like to thank all of the people who have, over the years, taken
the time to provide all of the generator and voltage regulator
information. Although I have never posted a question here, all
of the archived posts were extremely helpful in getting on with
the diagnosis of a '48 model C.

It was the only non-functioning system on a virtually original
tractor that is currently suffering through a complete
restoration. Unfortunately, the voltage regulator is toast, but
the generator, resistor light switch, and amp meter only required
minor repairs. Just waiting for a parts manual to see if this
regulator was original or a replacement.

Busted the generator pulley, though. I dropped it off a table, but
my big toe broke it's fall and prevented any serious damage
(ouch)!

I would like to get the rear rims sanblasted and re-galvanized.
Has anyone found a shop that has this capability?

Thanks again, RI Red

Follow Ups:

• Re: Thanks For The Help! ;-) Wayne Swenson 20:15:00 10/05/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]