Re: 240 U

Posted by CNKS on October 02, 2004 at 18:57:32 from (207.178.96.212):

In Reply to: 240 U posted by Ken-VT on October 02, 2004 at 16:03:33:

As mowr said, eliminate the other problems first. Then jack the right rear up and turn it by hand. Changing the bearing is not hard, just time-consuming. You have to pull the axle out of the bull gear, which requires removing the top cover. Some people work through the pto hole. I've done 6 of these so far, both sides of a C, Super H and 460.

Follow Ups:

• Re: 240 U Dave D 05:49:43 10/03/04 (5)
  • Re: 240 U CNKS 17:28:09 10/03/04 (4)
    • Re: 240 U Dave D 17:53:50 10/03/04 (2)
      • Re: 240 U CNKS 19:03:16 10/04/04 (1)
        • Re: 240 U Dave D 20:28:45 10/04/04 (0)
    • Re: 240 U CNKS 17:31:54 10/03/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]