Re: Ok IH Mechanics,,,,,

Posted by Bob on September 23, 2004 at 10:13:41 from (66.163.134.177):

In Reply to: Ok IH Mechanics,,,,, posted by ChadS on September 23, 2004 at 07:53:52:

The 403 hydrostatic steering system is about the same as a tractor system, say a 706. I recall the steering pressure relief on a 706 is set in the 1200 to 1400 PSI range. Perhaps someone will post the exact figure before I get to the shop to look it up. That would be above most vehicle PS pump pressures, but a vehicle pump would probably work just fine (unless it needs to steer with A LOT of weight on the front wheels). It may be possible to set the relief pressure up a bit on a vehicle pump, also, for this kind of application.

Follow Ups:

• Re: Ok IH Mechanics,,,,, Dick Davis 15:52:08 09/23/04 (2)
  • Re: Ok IH Mechanics,,,,, K.B.-826 18:39:00 09/23/04 (0)
  • Re: Ok IH Mechanics,,,,, Allan in NE 16:12:21 09/23/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]