Front weights on H

Posted by Brent in Iowa on September 16, 2004 at 13:12:56 from (199.120.87.137):

I have a 3 pt. on my H which I put a fairly heavy rear blade on in the winter (not one of those lightweight TSC-style jobs). The front end (NF) gets pretty light sometimes and I would like to weight it down. I don't have front wheel weights and am not sure I want them.

I was thinking of taking two pieces of channel iron and bolting them to the engine frame rails and then have weight hung out in front of the tractor on a cross-piece that would tie the two channel together.

Is this a good idea or would it stress the frame rails too much? Any other ideas?

Thanks....winter is coming and I need to get ready.

Follow Ups:

• Re: Front weights on H Wayne Swenson 19:59:44 09/16/04 (0)
• Re: Front weights on H DW 19:34:51 09/16/04 (0)
• Re: Front weights on H Brian Schmidt 14:05:05 09/16/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]