Re: Electrical Mess - HELP!

Posted by CNKS on September 10, 2004 at 19:47:19 from (207.178.99.103):

In Reply to: Electrical Mess - HELP! posted by Phil from Maryland... on September 10, 2004 at 16:20:19:

I believe the 404 was originally 12 volt, could be wrong. Such tractors did use a resistor and a 6 volt coil along with a 12 volt generator. Points, plugs, plug wires, coil and condensor -- Any and all may need to be replaced -- and be sure the 1342 firing order is wired correctly, and that it is timed properly. You could have a loose distributer shaft. You could also have burned valves or valves not adjusted properly. A burned valve will sound like, and is, a miss. Otherwise you have a fuel problem. There is nothing wrong with a 6 volt coil and resistor, probably thousands of OEM tractors, and as many conversions in existance. I have one.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]