Posted by Idaho Ron on April 02, 2009 at 19:27:25 from (208.98.173.2):
In Reply to: super c fast hitch posted by Bill Bowen on April 02, 2009 at 14:26:50:
I have a FH on my SC. SC's with a FH in my area are much more expensive. While is it true you will have a hard time finding equipment, there are three options. Option 1 is a set of arms and a spot for a top link. While I made mine I don't think I would put much weight on it. I use it for lifting under 400 pounds.
The second option is the 2 point to 3 point converter. I got this last summer. The only problem with these is not all 3 point stuff will fit. I had to make mine wider for my blade. My carryall won't fit at all so I use the arms.
Option #3 is to get 3 point equipment and weld arms on them.
While the true 3 point is probably a little easier to get implements for I like my SC / FH a lot. While they are not rare they are not found on every corner. In a county full of old tractors it still stands out.
Another cool thing about a FH. It has down pressure. I don't think many 3 points can say that. Ron
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Antique Tractor Wiring Basics - by Curtis von Fange. One of the most neglected parts of old tractors is the wiring. After sitting in the elements for half a century or more much equipment wiring has deteriorated to sparsely covered strands of copper or other metal. Plastic insulation has cracked, mice have eaten through the older clothed style coverings and the exposed wires have reacted to winter moisture and salts by turning blue and powdery. Terminal ends have corroded, rusted or just plain evaporated away. Aged wires not only keep an engin
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
