problems 560D

Posted by Scotty on August 23, 2004 at 07:20:16 from (12.219.188.72):

I bought a 560d in May I knew head had a crack in it water was getting in oil.I pulled head off and I found hairline cracks in sleeves. I put new sleeves, pistons, and rings. I also replaced the rod bearings and a remanufactured head with new valves. I had all the injectors tested and rebuilt. The glow plugs are new also. My problem is When I start the tractor It starts easily but it only starts on 4 or 5 cylinders And it smokes like crazy. After ten minutes or so it will run on all 6 cylinders. But it still smokes like crazy When I work It the smoke clears up. but when i let it idle for a few minutes it starts smoking like crazy. Any ideas thanks scotty

Follow Ups:

• Re: problems 560D captaink 09:06:41 08/23/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]