Update: Power-steering on 560

Posted by Jason(KS) on August 18, 2004 at 06:18:59 from (12.30.167.10):

In Reply to: Re: Power-steering on 560 posted by bugsy on August 17, 2004 at 18:27:51:

-had to change my name, someone reserved "Jason".

Ok, I took the control valve down and tore it apart; found a washer in about 8 pieces. It's the one that goes on the clevis, one of the two that squeezes the seal inside the cylinder. I replaced all o-rings, seals, and washers, put it back together and now I have power-steering when turning right. Good thing I have a sense of humor, it never ends. What now? I'm going to look through the archives, thought I'd seen this discussed here before. Maybe I didn't get the actuating lever in place correctly...The U-joint looks good. Thanks again.

Jason

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]