Re: Super A smoking badly on cold start

Posted by Stan(PA) on August 17, 2004 at 11:30:23 from (69.166.61.166):

In Reply to: Super A smoking badly on cold start posted by DDG on August 17, 2004 at 10:28:17:

If adding oil to cylinder didn't bring up compression, it sounds like you need a valve job. The smoke could be from oil seeping into the cylinders through the valves, and that would be why you notice it on cold start. I believe the compression on these was 100 to 110. I'd just go with getting the head done, and if you end up wanting to resleeve later, the head will already be done.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]