Farmall & IHC Tractors Discussion Board |
Re: Rear Wheel Weights
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by farmallkid From ONT. on August 10, 2004 at 09:07:13 from (209.216.148.161):
In Reply to: Re: Rear Wheel Weights posted by Richard Fazio on August 10, 2004 at 07:56:43:
Ya that would work, I got 8in long bolts, i could have went with 9in, cause a couple of the bolts, the end of the bolt is flush with the end of the nut, i would like a bit stickin out but owell. If you want to bolt one on first than i would get 10in bolts, that way you can have a nut on the first weight and on the second, I also used washers on the inside of the hub and on the outside of the weight were i put the weight on, i put lock washers on the outside to were they would fit. I dont think the tractors came from the factory with weights, they could have bin a add on at the dealer. Hope this helps.
Follow Ups:
Home
| Forums
Today's Featured Article -
Product Review: Electronic Ignition - by Staff. Oil, for example has come a long way in the last 50 years and I don't use anything but the latest API grade available. I've heard the arguments for non-detergent oils but would never trade it for today's formulations. Paint is another, the modern acrylic enamels are great for resistance to grease and fuel stains, retaining their shine and they last forever; unlike enamels and lacquers . Still another is the alternator. No doubt using the original generator keeps the tractor pure, but for thos
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|