Re: Farmall Super M or Farmall M

Posted by Hugh MacKay on August 09, 2004 at 03:17:21 from (209.226.247.32):

In Reply to: Farmall Super M or Farmall M posted by Jim Lockhart on August 08, 2004 at 20:55:05:

Jim: The casting codes, while they may not be conclusive if close to the change from M to SM. Those dates are the little series of letters and numbers that look like they have a round head screw cast between them. These give the day and month by number and the year by letter X is 1952, Y is 1953, etc. V was not used. These will also tell you if tractor is original if codes are same or two consecutive years. Wider spreads than that would indicate someone has built a tractor from two doner tractors. Should be a code on each cast piece of tractor.

Follow Ups:

• Re: Farmall Super M or Farmall M Hugh MacKay 14:30:19 08/09/04 (0)
• Farmall M eddy 09:01:07 08/09/04 (1)
  • Re: Farmall M Hugh MacKay 14:35:36 08/09/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]