Re: Almost finished with the A,,,, M tranny questi

Posted by MN Scott on August 07, 2004 at 20:30:06 from (206.9.216.51):

In Reply to: Almost finished with the A,,,, M tranny question posted by Jim in michigan on August 07, 2004 at 20:12:47:

Pound out the pin that holds the shifter in and remove the shifter. You should be able to take a punch and line up the notches in the shifter rails. Then build up the tip of the shifter with weld and reshape it so it fits down in the rails further to prevent the problem from reoccuring.

Follow Ups:

• Re: Almost finished with the A,,,, M tranny questi Jim in michigan 20:34:02 08/07/04 (1)
  • Re: Almost finished with the A,,,, M tranny questi EZ 05:11:32 08/08/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]